Pipe Coupling Dimensions Quiz: 15 ASME B16.11 Questions with Answers

Pipe coupling dimensions quiz: 15 ASME B16.11-2021 questions with answers on socket depth, laying length and pressure classes – Aienginear

Free 15-question pipe coupling dimensions quiz on ASME B16.11-2021: socket bore B, socket depth J, laying length E, Class 3000/6000/9000, NPT threads, the B31.3 socket-weld gap and fillet size – with explained answers.

Pipe Coupling Dimensions: Socket-Weld & Threaded (ASME B16.11-2021)

Pipe coupling dimensions chart: socket-weld and threaded couplings to ASME B16.11-2021, socket depth J, laying length E and socket bore B – Aienginear

Socket-weld and threaded pipe coupling dimensions to ASME B16.11-2021 for NPS 1/8 to 4 in Classes 3000, 6000 and 9000, with an interactive coupling finder, printable branded tables, pipe schedule matching and B31.3-2024 fit-up checks.

Stub End Dimensions Quiz: 15 ASME B16.9 Questions with Answers

Lap-joint stub end dimension drawing with G, F, T, R and OD to ASME B16.9-2024 – Aienginear

Free 15-question stub end dimensions quiz on ASME B16.9-2024: G, F, T and R, long vs short pattern, tolerances, MSS SP-43 Type A/B and weld bevels. Practice or exam mode, instant explanations, review, retry and printable result.

Stub End Dimensions: Long & Short Pattern Stub End Chart (ASME B16.9-2024)

Lap-joint stub end dimension drawing with G, F, T, R and OD to ASME B16.9-2024 – Aienginear

Lap-joint stub end dimensions to ASME B16.9-2024 for NPS ½–24 in mm and inch: lap diameter G, long and short pattern length F, fillet radius R, tolerances, inspection steps, PO wording and a free acceptance checker with a printable record.

Pipe Reducer Dimensions: Concentric & Eccentric Reducer Chart (ASME B16.9-2024)

Pipe reducer dimensions chart ASME B16.9-2024 – Aienginear

Concentric and eccentric butt-weld reducer dimensions to ASME B16.9-2024 – D1, D2 and H for 88 sizes NPS ¾–24 in mm and inch, tolerances, eccentric offset, a worked example, ordering checklist and an interactive Reducer Finder.

Return Bend Dimensions: ASME B16.9 180° Long & Short Radius Chart (mm & inch)

180 degree return bend dimensions chart for long radius and short radius ASME B16.9 fittings - Aienginear

ASME B16.9-2024 return bend dimensions in mm and inch for 180° long radius and short radius butt-weld returns, NPS ½–24: centre-to-centre O, back-to-face K, tolerances, a PO line generator and a coil layout calculator.

Pipe Elbow Dimensions: ASME B16.9 Long & Short Radius Elbow Chart (mm & inch)

ASME B16.9 pipe elbow dimensions chart – long and short radius, mm and inch – Aienginear

ASME B16.9-2024 pipe elbow dimensions in mm and inch for 90° and 45° long radius and 90° short radius butt-weld elbows, NPS ½–48 — with tolerances, take-out, odd-angle cutting and a free cut-length calculator.

Pipe Fittings Inspection: Visual, Dimensional, NDT, Proof Test & Marking Guide

Aienginear pipe fittings inspection guide cover: elbow under a magnifier with ASME B16.9 and ASTM fitting standards

A standards-checked guide to inspecting pipe fittings: what to check, which tests apply to which fitting, ASME B16.9 tolerances, NDT selection, the B16.9-2024 proof test and marking, with a free acceptance calculator and printable checklist.

ASTM A105/A105M-26: Carbon Steel Forgings for Piping — Complete Engineering Guide

ASTM A105/A105M-26 guide cover with ASME B16.5 Group 1.1 flange pressure-temperature rating chart

ASTM A105/A105M-26 explained by Aienginear: chemistry and Mn allowance, 485/250 MPa strength, 197 HBW hardness, A105N and heat-treatment rules, ASME B16.5 Group 1.1 flange ratings, sour service, welding, MTR checks, plus a free flange rating finder and MTR chemistry checker.